Any machine will malfunction during long-term use, and the can seamer is no exception. Then, what are the common faults of the can seamer, and what are the factors that cause these failures?
1. If the sealing is not strong enough, air can easily enter the product if the sealing is not strong enough, which shortens the shelf life of the product, causes losses to the manufacturer, and brings risks to the consumers who purchase the product. Therefore, the failure of the sealing is a failure of the sealing machine that must be paid attention to. Most of this situation occurs because the pressure of the cold-pressed rubber wheel is not suitable, the heat-sealing speed is too fast or the temperature is not enough. At this time, it is only necessary to increase the heat-sealing temperature, then reduce the heat-sealing speed, and at the same time increase the cold-pressed glue. The pressure of force.
2. Irregular markings appear at the sealing place, which is also a common fault, because there are many irregular bump marks on the cold press machine. As time accumulates, the sealing machine will absorb dust and other substances when it is working. It will stick to the sealing machine, causing uneven heating of the sealing machine, resulting in air bubbles. The way to deal with this kind of failure is very simple, we only need to clean the sealing machine regularly or replace the cold glue machine.
FILLEX is committed to designing advanced and efficient automatic packaging lines, specializing in the production of sealing, filling, labeling, modern packaging equipment, etc. The equipment has passed CE and ISO certification. The company has a professional team of 15 years of design, development and manufacturing, standardized production plant, modern production equipment, and strict production management system, which lay a solid foundation for customers to manufacture better packaging equipment.
Phone
